DDoptics rifle scope Nighteagle V6 5-30x50 Gen3 | A4N (hunting) | MRAD
- Order number: 442511142
- Info: Dieser Artikel ist von sämtlichen Gutscheinen ausgeschlossen
- CT glass (Clear Transmission)
- Zero stop (for zero stop)
- Double turn (double scaling)
- Horizontal adjustment with opposite Scales (wind left - right)
- New Reticle 4 (A4N) with significantly finer bars
- very high resolution
- inconspicuous, hunting version with small turrets
- Accessories: 1x flip caps, cleaning cloth, DDoptics chip, targets, target optics instructions, ballistics set
Which red dot is installed in this rifle scope? A manual glass fiber red dot is installed in our Nighteagle V6 5-30x50 rifle scope as standard.
Hunting A4N illuminated reticle
The Nighteagle V6 5-30x50 rifle scope has the successful, modern new reticle 4.
New Reticle 4 for minimal target coverage
Looking through the new generation III rifle scope, the viewer immediately recognizes the practical design:
The reticle in the 4N reticle is much finer and the slightly thicker, outer bars are only half as thick and are significantly further apart. With great advantage, especially for the hunter in poor light conditions, since the target is only minimally covered, a lightning-fast and safe attack can be optimally supported.
The reticle is in the eyepiece focal plane (2nd focal plane). This means that it always remains the same size when changing magnification. Even at 30x magnification, the crosshairs only cover the target by 3.91 mm at a shooting distance of 100 m and the field of view is still 1.1 m at 100 m at this maximum magnification. The scopes allow lightning-fast sighting.
New features
What's new about the latest generation rifle scopes? At first glance, 3 changes immediately catch the eye:
1. The magnification adjustment ring has been noticeably changed and now provides more grip thanks to its coarser structure.
2. Reticle 4 has become significantly finer and makes more room in the middle.
3. The reticle adjustment is made of metal, is more clearly defined and has a double turn and zero stop.
Reticle quick adjustment with zero stop
The number of click adjustments made can be read and adjusted accordingly on a double scale (double turn) on the height adjustment tower. After sighting in, the reticle adjustment can be "zeroed". The zero stop ring is then turned as far as it will go. The zero setting is then countered from below using the zero stop ring in order to achieve a stop at the zero position. Starting from the zero position, assuming knowledge of the load, different shooting distances can be preset using a marking system. The windage adjustment turret is labeled with two opposing scales. Starting from the setting zero, the reticle can be preset here depending on the wind direction and wind speed or any movement of the target.
The parallax compensation guarantees a razor-sharp and fatigue-free image from 25 m at all magnification settings and corrects the marksman's error caused by oblique viewing.
Best Price Service
If you have an offer that is more than 10% below the RRP from DDoptics, you will also receive this price from us.
 |
 |
 |
| 1. Produkt online gefunden | 2. DDoptics den Link schicken | 3. DEAL abschließen |
| mehr als 10 % unter DDoptics Preis | als Nachweis | gefundenen Preis auch von uns erhalten |
High magnifications in low light
Hunting in large field areas demands a lot from the target optics. High magnifications make safe targeting possible over long distances, but it is important here that the image brightness is still usable even when using high magnification. Our hunting Nighteagle V6 5-30x50 scopes were created for this. The inconspicuous, hunting design discreetly hides the performance of the rifle scope. The small reticle adjustment turrets are in no way inferior to the large, tactical adjustment turrets in terms of their usability.
Robust adjustment mechanism for demanding use
The reticle adjustment turrets of the DDoptics Generation III scopes are made of a robust aluminum alloy and are free of all plastic parts. All aluminum parts are finished with the new non-glossy DDoptics "fine-black" anodizing coating. The adjustment mechanism was changed to the tactical version, i. H. it is not only very shockproof and completely waterproof, but also hard-running and thus protected against unintentional adjustment. This means that the reticle adjustment can also be used "open" in everyday hunting, i.e. without a screw cap, in order to be able to quickly adjust the reticle depending on the situation.
Optical performance
The extra complex HD optics offers a high-contrast and color-true image with outstanding edge sharpness properties even at 30x magnification due to the coating specially developed for this optics, which does not allow any reflections or scattered light. In particular, color fringes have been reduced to a minimum. This means that the Nighteagle V6 5-30x50 Tactical rifle scope can also be used as a spotting scope and for reliable targeting at long distances.
| Diopter adjustment: | -3 to +3 |
| Enlargement: | 5-30x |
| Twilight number: | 15-38,7 |
| Weight in grams: | 674 |
| Type of optics: | Rifle scope |
| Generation: | 3 |
| Compensation: | HDX III |
| Lens diameter lens in mm: | 50 |
| Exit pupil in mm: | 9,79-1,62 |
| Field of view at 100 m (in m): | 7,2-1,1 |
| Interpupillary distance in mm: | 90.5-91.5 |
| Reticle: | New reticle 4 |
| Luminescent point II: | yes |
| Reticle focal plane: | 2nd focal plane |
| Reticle adjustment / click: | 0.1 MRAD |
| Reticle adjustment (scaling): | simply |
| Max. adjustment range: | 15 MRAD |
| Parallax compensation: | 20-500-infinity |
| Surface: | fine black |
| Center tube diameter in mm: | 30 |
| ASV zero stop: | yes |
| Lens diameter outside in mm: | 58 |
| Eyepiece diameter in mm: | 39,5 |
| Total length in mm: | 345 |